Products: Equipment


Electronic Straight Edge

Electronic Straight Edge Electronic Straight Edge (1773 KB)

  • Rugged construction
  • Lightweight and portable
  • Immediate results
  • Transfer results to PC
  • Build up location history
  • Fast measuring time
  • Comprehensive Technical Support and Back-Up by Thermit® Australia
FactAir Stone Blower

FactAir Stoneblower FactAir Stoneblower (362 KB)

  • Significant cost savings as maintenance crews can carry out works
  • Beneficial for fixes between major tamping cycles
  • Particularly suited to switch and crossing maintenance, especially around points and crossings where tamping can be difficult
  • Does not damage ballast like conventional compaction methods
  • Suitable for use in bad ballast areas
  • Compact size allows easy access to all areas with significant savings over larger plant
  • Comprehensive Technical Support and Back-Up by Thermit® Australia
Glued Insulated Joints

Glued Insulated Joints (GIJs) Glued Insulated Joints (GIJs) (336 KB)

  • Locally manufactured to ensure the highest quality and guaranteed performance
  • Manufactured in accordance with AS1085.12-2002 conforming to ISO 9001 standards
  • As a factory manufactured joint, the Thermabond Rail Joint can be factory hardened in the joint area
  • MT – for quick in-situ installation and suitable for all rail types
  • ETW 1 – for maximum durability and most demanding requirements
  • ETW 2 – with highest durability and available for use after 1hr of installation
  • All processes allow quick installation on track
  • Comprehensive Technical Support and Back-Up by Thermit® Australia
Insulated Rail Joints

Insulated Rail Joints Insulated Rail Joints (146 KB)

  • Max. safety, reliability and duration
  • Usable worldwide in all climates
  • Over 1,000,000 installations in track
  • 30,000 new installations every year
  • Track experience for over 30 years
  • Approved and track installations in over 50 countries (TTCI approval)
  • Approved from almost all big infrastructure companies worldwide
  • Comprehensive Technical Support and Back-Up by Thermit® Australia
Sheerspeed Railway Screening Speed Tent

Sheerspeed Railway Screening Speed Tent Sheerspeed Railway Screening Speed Tent (195 KB)

  • Reinforced PVC fabric is ideally weighted for stability and strength in operation versus other lighter products which are prone to being blown away
  • The screen erection assembly process takes only a couple of minutes
  • Screens can be attached to Track Welding Tents for increased flexibility
  • Screen sections can be added to with additional sections to make a continuous shield
  • No loose components which avoids objects becoming detached and straying onto adjacent track or into overhead lines during set-up, track welding/grinding and dismantling
  • Compact size and light weight allows ease of use for operators
  • Comprehensive Technical Support and Back-Up by Thermit® Australia
Sheerspeed Track Welding Speed Tent

Sheerspeed Track Welding Speed Tent Sheerspeed Track Welding Speed Tent (381 KB)

  • Avoid injury to public and reduce fire hazards by shielding your work-site.
  • Maintain productivity when weather would not normally allow welding to continue
  • No loose components with only the under rail poles for securing the tent
  • Under rail poles prevent the tent from straying onto adjacent track or into overhead lines during set-up, track welding and dismantling
  • Access is best in class where operators can access the tent without the need to bend or stoop therefore avoiding dangerous contact with face or eyes of the operator
  • The tent erection assembly process takes only a couple of minutes
  • The floor dimensions of the tent are square to facilitate use in any orientation with or without the under rail poles, therefore the tent can be best positioned against directional rain or wind
  • Compact size and light weight allows ease of use for operators
  • Comprehensive Technical Support and Back-Up by Thermit® Australia
Rail Shears

Rail Shears Rail Shears (647 KB)

  • Range of power packs available including 4-stroke, electric and pneumatic motors guaranteeing flexibility and ease of use depending on working conditions
  • Lightweight shear blades ensures overall weight is not compromised and ease of use is maximised
  • Shears are available from 120 kN to 200 kN compression force covering all Thermit® welds in crane, grooved and flat bottom rail
  • Compact dimensions and lightweight (from 23.5kg) allow shears to be operated with minimal OH&S concerns and reduced LTI
  • Stroke range from 120mm to 150mm ensures all Thermit® welding processes are covered including Wide Gap (75mm), Head Repair, Step Welds, Crane Rail and Thermit® welds combining fishplate hole (LSV)
  • Depending on blade type, shearing action will trim either rail head or rail head and risers on foot of rail
  • Comprehensive Technical Support and Back-Up by Thermit® Australia